Updating bios from cd

Rated 4.41/5 based on 934 customer reviews

If you hit the ENTER key, you get the screen below.

This is the screen where you set the system clock and set several of the drive parameters.

Some of the newer motherboards have mouse capability but can be navigated with the arrow keys as well.

If you're going to buy a motherboard and want to be able to use a mouse when working with the BIOS presets, look for one with a UEFI BIOS interface.

That memory is used to store the values entered when you set up the computer's BIOS parameters.

This page shows some of the various setting and will tell, briefly what the setting affect in the computer's operation.

The BIOS section of the manual will tell you what you need to know about the BIOS settings.

updating bios from cd-78

updating bios from cd-73

updating bios from cd-53

updating bios from cd-10

Super-boot allows the computer to start faster by storing certain basic system information in memory.Before I go any further, I should tell you that you should not go into the BIOS unless you either know what you're doing or you're working on a computer that is unimportant to you or anyone who may need it.While it's relatively difficult to destroy data by changing values in the BIOS, it IS easy to make changes that would prevent the computer from booting.If you set it too high, your computer may become unstable, it may be unable to boot and/or it could overheat.If you ever make a BIOS change that prevents the computer from booting, you can clear the CMOS memory with the 'clear CMOS' jumper.

Leave a Reply